1 Professional Levelling unit for Semi Professional ,M4 LUX , M5 Easy and Hobby scaffolds. CHECK THAT THE SCAFFOLD IS PREPARED FOR LEVELER! ..

N° 1 Scaffold stabilizing bracket 120 cm ..

Scaffold stabilizing bracket 180cm (UNI EN 1004) ..

Device designed to compensate for unevennessThe total size is 101.5 cm.It is equipped with 8 holes with a 10 cm spacing, starting from an initial height of 17 cm from the support point.This configurat..

1 Proessional Levelling unit with brake wheel for M4 LUX and SCEDILUX scaffolds CHECK THAT THE SCAFFOLD IS PREPARED FOR LEVELER! ..

Terminal railing for M4 LUX and Semipro (2 ladder frames + 4 diagonals + 2 horizontal protection frames).The red color is for indicative purposes only..

Scaffold stabilizing bracket 300 cm (UNI EN 1004) per trabattelli. Telescopic, resealable from 3 to 2 m to facilitate transport. ..

Worktop in plywood 160cm x 30cm for SemiPro and M4 LUX scaffoldings. ..

Wall anchoring set for scaffolding.NOTICE! Shipping is free only if the product is purchased together with the scaffolding. ..

N° 1 Scaffold stabilizing bracket 200 cm ..

Internal ladder for scaffoldings height 2.30 m (7 pegs). To move more easily and safely from one floor to another of the mobile scaffolding. Made of aluminum, with steel hooks. ..

Extended Worktop in plywood for HOBBY , SemiPro and M4 LUX scaffoldings. Extended version, width 41 cm (instead of 30 cm of the normal worktop). ..

4-sided wooden footboard for SemiPro Scaffoldings..

1 Leveling Jack for SemiPro and hobby Scaffolds PLEASE CHECK THAT THE SCAFFOLD IS PREPARED FOR LEVELERS! ..

Non-slip Worktop with trapdoor for SemiPro and M4 scaffolding.160CM X 64CM ..

Non-slip Worktop with trapdoor for :HOBBYSUPERHOBBYTERNO 1FASTJOLLY 160SCEDILUXM4 LUX BASE NORMALEM4 LUX BASE ESTRAIBILEM4 LUX 150160cm x 55cm ..

Plywood Worktop with trapdoor for SemiPro and M4 scaffolds ..

ECO Plywood Worktop with trapdoor for the following scaffold seriesHobbySuperhobbyTerno 1FastJolly 160M4 LuxM4 Lux with extractable baseM4 Lux 150 ..

1 extension unit / upgrade unit for M4 LUX 150 model with anti-slip latches.H 150 cm (2 uprights + 2 stringers + 4 diagonals)..

Extended Worktop in Carply for HOBBY , SemiPro and M4 LUX scaffoldings. Extended version, width 41 cm (instead of 30 cm of the normal worktop). ..

Worktop in carply for  SemiPro and M4 LUX scaffoldings. ..

1 extension unit / upgrade unit half span for M4 LUX 150 scaffoldsHeight 59 CM (2 SHOULDERS + 2 STRAPS + 4 DIAGONAL)..

Terminal railing forScedilux and Terno (2 ladder frames + 2 diagonals + 2 horizontal protection frames).The red color is for indicative purposes only..

THE PURCHASE INCLUDES THE FOLLOWING COMPONENTS 1 extractable base Unit (UNI EN 1004) 160 x 95 cm with four wheels 4 wheels with brakes Ø 125 mm ..

1 extension unit / upgrade unit half span for M4 LUX 150 scaffoldsHeight 120 CM (2 SHOULDERS + 2 STRAPS + 4 DIAGONAL)..

4-sided carply footboard for SemiPro Scaffoldings..

The protection bars installed on the short side of the end section increase safety at the end of the guardrail, providing additional protection in the most exposed areas.A simple and effective solutio..

The protection bars allow a second guardrail to be installed at an intermediate height, increasing the safety and versatility of the structure.This solution makes it possible to create multiple workin..